|
Home Products Primary fire extinguishing means Hose fittings
Hose fittingsTrunks firemen hand - are designed to create a solid compact or the spray of water, as well as for protection against thermal radiation water spray when fighting fires. Trunks firemen MS-50, MS-50P, the RS-70 - are used to create and direction of continuous jet of water. Trunks firemen 50.01 PC, PC-50.01P - are designed for permanent mounting on the sleeve, and directions for creating a continuous stream of water. Fire trunks RSP-50, RSC-50, RSP-70 - are used to create a solid compact or the spray of water, as well as for adjusting the flow of water and spray water with a constant angle of the torch. Fire trunks RSKZ-70 - designed to create a solid compact or atomized water jet, and for adjusting the flow of water and water spray plume with a constant angle; have the function of formation of a protective water curtain, which protects people from thermal radiation.
Head connections
Head connections - are designed for quick, firm and tight connection of pressure or suction hoses with different nominal sizes, both among themselves and with the various fire equipment, which is very important in case of fire, when the operational actions depends on the quantity of material losses, and sometimes people's lives.
Connection heads depending on the destination types include:
Pressure connection heads are baghouse, the coupling, tsapkovymi sucked and transition with different nominal sizes. The diameter of the head is selected for a specific sleeve and other fire-fighting equipment. The coupling head and tsapkovye are used to connect plumbing fittings and pressure fire hoses. Connection heads are used for joining hoses between themselves and with fire equipment. For internal fire hydrants used head type GR-50 P and GM in a plastic version (weighing less than 0.14 kg). The quality and completeness of a set of fire-fighting equipment depends on the speed of response in case of fire, so the full set of required connection heads must fully comply with the Fire extinguishing equipment used. The coupling sleeve head allows you to connect the discharge hose to the fire equipment, providing an opportunity to immediately let the water pressure and proceed without delay to extinguish the fire. The head of the pressure connecting tsapkovaya is designed for quick, firm and tight connection between hoses and a fire equipment. Tsapkovaya head at the end of the sleeve has an external thread. Transitional bag head are used to connect fire hoses and fire-fighting equipment, which have different nominal diameters. When downtime hydrants or other fire-fighting equipment to prevent leaks use head stub. Head-cap closes the connection holes or fire pump discharge hose and permanently retains its further operation. Connection suction head are used to connect the suction and pressure-suction hoses between themselves and with fire equipment. Branching sleeve three-way The ramifications bag - designed to separate the flow of feed water, aqueous solutions and control their numbers.
Suction grid Mesh suction - designed to protect the pump from foreign objects and water retention during short stops.
Sealing rings O-rings - designed for a complete connection heads to seal.
Ключи Keys - are intended to serve the connection heads.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||